Harbor Freight Tools 32940 Specifications, Safety Warnings and Precautions, Read all instructions before using this product!, Save This Manual

SKU 32940 Page 2

Specifications

Air Inlet 1/4”-18 NPT

Maximum Operating Pressure 90 PSI

Blows Per Minute 4,500 BPM

Average Air Consumption 4 CFM

Weight 2-1/4 Lbs.

Accepts standard 10mm shank chisels.

WARNING: When using tools, basic safety precautions should always be followed to

reduce the risk of personal injury and damage to equipment.

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Do not use machines or power tools in damp or wet

locations. Don’t expose to rain. K eep work area well lit. Do not use electrically po wered

tools in the presence of flammable gases or liquids.

3. K eep children awa y. Children must ne v er be allowed in the w ork area. Do not let them

handle machines, tools, extension cords, or air hoses.

4. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit

rust. Always lock up tools and keep out of reach of children.

5. Use the right tool for the job. Do not attempt to force a small tool or attachment to do

the work of a larger industrial tool. There are certain applications f or which this tool was

designed. It will do the job better and more safely at the rate for which it was intended.

Do not modify this tool and do not use this tool for a purpose for which it was not in-

tended.

6. Dress properl y. Do not wear loose clothing or je welry as they can be caught in mo ving

parts. Protectiv e , electrically non-conductiv e clothes and non-skid f ootw ear are recom-

mended when working. W ear restrictiv e hair covering to contain long hair .

7. Use eye and ear protection. Always wear ANSI approved impact safety glasses under

a full face shield while working. Wear an ANSI approved dust mask or respirator when

working around metal, wood, and chemical dusts and mists.

8. Do not overreach . Keep proper footing and balance at all times. Do not reach over or

across running machines or air hoses.

You will need the manual for the safety warnings and precautions, assembly instr uc-

tions, operating and maintenance procedures , parts list and diag ram. K eep y our in v oice with

this manual. Write the invoice n umber on the inside of the front cover. K eep the man ual and

invoice in a safe and dry place for future reference.