Cleaning
Read the entire Important Safeguards section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
To prevent serious injury
from accidental operation or electric shock:
Before cleaning this Ultrasonic Cleaner, make sure the “OFF” Button is pushed off, the cord is unplugged, and the unit has cooled completely.
Do not immerse motor, cord, or plug in water or any other liquid.
1.Dry with a soft cloth. Wipe the hous- ing with a soft clean cloth or sponge.
2.Allow unit to dry completely before use.
Assembly
NOTE: No assembly is required for this Ultrasonic Cleaner.
Operation
Read the entire Important Safeguards section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
1.Clean the appliance before each use by wiping the interior and exterior with a clean, soft cloth.
2.NOTE: FAILURE TO FILL THE ULTRASONIC CLEANER WITH WATER OR A
Using the Ultrasonic Cleaner
1.Place the Ultrasonic Cleaner on a counter top or table capable of hold- ing both the Cleaner and it’s contents.
2.Fill the tank with water.
3.Put the articles in the plastic basket and place them in the tank. Ensure the water lever below the
4.Plug in the Ultrasonic Cleaner into a 120V outlet. The inner blue light will turn on.
5.Press the “ON” button to start clean- ing, the Light (red) will go on on. See Figure 1.
Figure 1
Light (red)
6.3 minutes later, the item is finished cleaning. The Cleaner will stop auto- matically. The light will go off.
SKU 3305 | For technical questions, please call | Page 5 |
