SYMBOLOGY

Double Insulated

Canadian Standards

Association

Underwriters

Laboratories, Inc.

V~

A

Volts Alternating Current

Amperes

n

No Load Revolutions

o xxxx/min.

Per Minute (RPM)

WARNING! The warnings, precautions, and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. The operator must understand that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Unpacking

When unpacking the 150 Watt Portable Clamp Light, check to make sure parts on page are included. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS at

1-800-444-3353.

Assembly

Your Portable Clamp Light will require some minor assembly. The Light requires special conditions for set up and operation. It is important that you read the entire manual to become familiar with the product BEFORE you use the Portable Clamp Light. Before operating the Portable Clamp Light be sure that you have all parts described in the Parts List and Assembly Diagram located on page 10 of this manual.

1.The Light comes with a Spring Clamp (1) and a hook, either of which can be used to hang the Clamp Light. The hook can be turned to face up or down on the Spring Clamp as shown in Figure 1.

 

Figure 1

Spring

Press here

to separate

Clamp (1)

clamp

 

 

Hook

 

 

SKU 35149

For technical questions please call 1-800-444-3353.

Page

Page 8
Image 8
Harbor Freight Tools 35149 operating instructions Per Minute RPM, Unpacking, Assembly