Harbor Freight Tools 35558, 35559, 35560, 35561 ASSEMBLY INSTRUCTIONS

SKU For technical questions, please call 1-800-444-3353 PAGE 6

GAS VALVE PROPANE TANK

(NOT INCLUDED)

TEMPERATURE

CONTROL KNOB

(4)

INLET

CONNECTION

NOZZLE

(5)

HOSE

CONNECTOR

MODEL 91357 OR MODEL 91359

LP REGULATOR & HOSE KIT

(NOT INCLUDED)

FIGURE A

ASSEMBLY INSTRUCTIONS

1. WARNING! Always make sure to close the valve on the propane tank

(not included) prior to assembling the Propane Stove, performing maintenance, or

making any adjustments to the unit.

2. CAUTION! This product is

. Be aware of sharp

edges. Use heavy duty work gloves and ANSI approved safety impact eye

goggles when assembling.

3. Turn the Propane Stove upside down, and attach a Rubber Foot (7) to each

corner of the unit. (See Assy. Diagram.)

the Temperature Control Knobs (4) must be

attached. To do so, loosen the counter-sunk Screw in the Knob. Insert the Knob

onto the Burner Control Shaft by aligning the flat edges of the Knob and Shaft.

Then, firmly tighten the Screw. (See Assy. Diagram.)

WARNING: The Propane Stove requires the attachment and use of the Model

91357 or Model 91359 LP Regulator & Hose Kit (UL® Listed) which are sold

separately by Harbor Freight Tools. (See Figure A.)

5. To attach the Model 91357 or Model 91359 LP Regulator & Hose Kit to the

Propane Stove, remove the plastic protective cap from the Inlet Connection

Nozzle (5) on the Propane Stove. Next, wrap the male threads of the Inlet

Connection Nozzle with about 4 inches of pipe thread seal tape (not included).

Then, screw the Hose Connector firmly onto the Inlet Connection Nozzle.

(See Figure A.)

35558

35559

35560

35561

caution are factors which cannot be built into this product, but must be supplied

by the operator.