![](/images/new-backgrounds/1283825/28382511x1.webp)
18.Do not force the Router. This tool will do the work better and safer at the speed and capacity for which it was designed.
19.Always unplug the Router from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
20.Never leave the Router unattended while running. Turn power off if you have to leave the Router.
21.Before each use, check all nuts, bolts, and screws for tightness. Vibration during mixing may cause these to loosen.
22.Keep extension cord off the ground and away from water.
23.Always connect the Line Cord (or extension cord) to a Ground Fault Circuit Interrupter (GFCI) protected electrical outlet.
24.If this Plunge Router is to be mounted on a router table, it must be an approved router table and must have all appropriate holding devices and safety shields.
Never use a router table which is not specifically designed for use with this
Plunge Router.
25.People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.
26.WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contains chemicals known [to the State of California] to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
Lead from
Crystalline silica from bricks and cement or other masonry products Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code § 25249.5, et seq.)
Grounding
WARNING Improperlyshock. connecting the grounding wire can result in electric
Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the
SKU 37793 | For technical questions, please call | Page |