Page 4
SKU 3878
OperationUnpacking
When unpacking, check to make sure the parts listed on page 6 are included. If any parts
are missing or broken, please call Harbor Freight Tools at the number on the cover of this
manual as soon as possible.
To Assemble:
1. Insert one end of the clear Intake Hose (2) into a black Hose Connector (5). Insert the
hose with connector into the top intake valve of the Pump (1) and tighten securely. See
Figure 1
2. Repeat Step 1 using the clear Discharge Hose (3), except insert this hose with connector
into the bottom discharge valve of the Pump (1) and tighten securely.
3. T o begin the siphon process , put the Intak e Hose (2) into the liquid to be transf erred. Put
the Discharge Hose (3) into the location where the liquid is to go. Please note: Make sure
that the Discharge Hose (3) is positioned lower than the Intake Hose (2).
4. Prime the Siphon Pump (1) with 3 to 4 pumps of the plunger at the top of the Pump. Once
the liquid begins to flow, it will transfer without further pumping.
Figure 1
Pump (1)
Hose Connector (5)
Intake Hose (2)