SPECIFICATIONS

 

 

Motor

1-3/4 HP Rated

Electrical

120 V~, 11 Amps, 3450 RPM, Single Phase, 60 Hz

Power Cord

3 prong grounded 14 AWG X 3C, double insulated, UL listed, 20’ long

Air Outlet Fitting

1/4” NPT barbed

Drive Type

Direct

Pump Stage

Single

Air Tank Size

4 Gal.

Pressure Range

Pressure Switch On at 80 PSI; Pressure Switch Off at 115 PSI

Air Delivery

4.2 SCFM at 90 PSI; 5.2 SCFM at 40 PSI

Pressure Disconnect

Automatically releases pressure if overloaded to 120 PSI

Oil Requirement

Standard non-detergent 30 weight compressor or motor oil

Weight

51 Lbs.

Note: When using extensions cords (not included) - To avoid circuit breaker and voltage drop problems, we recommend using only 12 gauge x 50 foot extension cords (Item #41444 or #45287), available from Harbor Freight Tools).

FEATURES OF THIS COMPRESSOR

#233060

1.This small, portable compressor is ideal for use in shops with limited storage space.

2.80-115 PSI operating range is ideal for most shop uses including air tools, spraying, tire inflation, air cleaning, etc.

3.Pressure switch maintains correct operating pressure at all times.

4.Pressure gauge gives continuous, real-time readout of current pressure delivery.

5.Maximum pressure disconnect safety valve prevents over-pressurization of tank.

6.Delivers enough air for continuous use in most applications.

7.Sturdy construction will deliver years of satisfactory service.

8.Your compressor is fully assembled when you receive it.

Warning: Fill compressor with oil before using; running with NO or LOW OIL voids warranty. Optimal oil tank capacity is 7.8 ounces.

SAVE THIS MANUAL

You will need the manual for the safety warnings and cautions, assembly instructions, operating procedures, maintenance procedures, trouble shooting, parts list, and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep both this manual and your invoice in a safe, dry place for future reference.

NOTICE

The Warnings, Cautions, and Instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this prod- uct, but must be supplied by the operator.

Page 2 SKU # 38898

REV 08/01; 01/02; 03/04; 11/04; 10/05; 02/06

Page 2
Image 2
Harbor Freight Tools 38898 operating instructions Specifications, Features of this Compressor, Save this Manual