Compressor Assembly

Part # Description

1Screw

2Screw

3Washer

4Washer

5Air Filter

6Cylinder Case

7Gasket, Crankshaft Cover

8Valve Seat

9Gasket, Valve Seat

10Valve Plate

11Valve Seat

12Gasket, Valve Seat

13Cylinder

14Cylinder Gasket

15Compression Ring

16Scraping Oil Ring

17Piston

18Piston Pin

19Crankshaft Retainer

20Oil Stick

21Screw

Part# Description

22Connecting Rod

23Crankshaft

24Gasket, Front Cover

25Front Cover

26Washer

27Washer

28Bolt

29Screw

30Crankshaft Case

31Nut

32Seal Washer

33Bearing

34Electric Capacitor

35Bolt

36Screw

37Motor

38Washer

39Radiating Fan Wheel

40Radiating Cover

41Thermal Switch

MAINTENANCE

1.Check the oil before each use to be sure the level of oil is correct (see illustration on page 5). If the oil level is too low, add oil. If it is too high, drain some oil out by removing the drain plug.

2.Drain and replace the oil once per year. Replace more often if the compressor is used heavily or the oil appears dirty.

3.Check the air filter every six months, or more often if compressor is used in a dirty or dusty environment. Replacement air filters are available from Harbor Freight Tools.

4.Drain the air tank after each use, by turning the drain petcock clockwise to open it. Turn the petcock counterclockwise to close it. It is a good practice to leave the drain plug open between uses to ensure that the tank remains dry.

5.Never use flammable liquids or solvents to clean the compressor. For cleaning, unplug the unit, and clean with a mild detergent and water. Be careful not to introduce water into any electrical components.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY: NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT: IN FACT THE MANUFACTURER AND/ OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Page 7 SKU # 38898

Rev 03/00

REV 11/01

REV 03/04

Page 7
Image 7
Harbor Freight Tools 38898 operating instructions Part# Description, Maintenance