18.Use proper size and type extension cord. If an extension cord is required to power tools, it must be of the proper size and type to supply the correct current to the tool without heating up. Otherwise, the extension cord could melt and catch fire, or cause electrical damage to the tool. Most hand tools require an extension cord of 0 to 10 amps capability (up to 50 feet), with wire size rated at 18 AWG. Longer extension cords require larger size wire. If you are using the tool outdoors, use an extension cord rated for outdoor use. (signified by “WA” on the jacket).
19.Maintenance. For your safety, service and maintenance should be performed regularly by a qualified technician.
Note: Performance of this product may vary depending on variations in line voltage.
Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are fac- tors which cannot be built into this product, but must be supplied by the opera- tor.
Unpacking
When unpacking, check to make sure the following parts are included.
(1)
(2)
(3)
(5)
(6)
(4)
(7)
(8)
NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement
If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual.
SKU 40134 | Page 4 |
