|
| PRODUCT SPECIFICATIONS |
| |
|
|
|
|
|
| Item |
| Description |
|
| Electrical Requirements |
| 120VAC / 60Hz / 4.8 Start Up Amps |
|
|
|
| 3565 RPM |
|
|
|
| Power Cord Plug Type: 3 Prong, Grounded | 235591 |
|
|
| Power Cord Length: 7 Feet | |
|
|
|
| |
| Cutting Wheel Size/Type |
| 7” Diameter / Rated 8500 RPM / Wet Diamond Bonded |
|
| Cutting Wheel RPM Rating |
| Minimum 3600 RPM |
|
| Material Cutting Capacity |
| Maximum 12” Wide x 1” High |
|
| Rotating Angle of Table |
|
| |
| Table Dimensions |
|
| |
| Accessories |
| Diagonal Cutting Fixture / Plastic Tub / 7” Cutting Wheel |
|
| Unit Weight |
| 32.5 Pounds |
|
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
REV 02/07
SKU 40315 | For technical questions, please call | Page 2 |
