3.With the dowel holes precisely drilled, it is easy to assemble the two boards together. Put glue in the holes and on the dowels. Insert the dowels into the holes and tightly clamp the boards until glue has dried.
4.The Self Centering Doweling Jig can be used to make accurate butt joints, miter joints, and edge joints, as well as acting as a mortising guide.
Parts Listing
Part # | Description | Qty | Part # | Description | Qty |
1 | Screw | 2 | 8 | Spring | 1 |
2 | Adjustment Nut | 1 | 9 | Steel Ball | 1 |
3 | Washer | 2 | 10 | Guide Block | 1 |
4 | Rear Pressing Block | 1 | 11 | Leading Shaft | 2 |
5 | Screw Arbor | 1 | 12 | Front Pressing Block | 1 |
6 | Bushing | 6 | 13 | Handle | 1 |
7 | Spring Screw | 1 |
|
|
|
Parts Diagram
Note: There are 4 holes along the top of the Jig. Only 2 of the holes accept threaded bushings. The other 2 holes accept 7/16” and 1/2” drill bits.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTA- TION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTAL- LATION OF REPLACEMENT PARTS THERETO.
#41345 | REV 08/04 | Page 3 |
