THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below:
Model____________ Serial No._____________ | Purchase Date_______________ |
SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly.
| Technical Specifications |
Electrical Requirements: | 110V, 12 Amp, 60 Hz |
Die Sizes: | 1/2", 3/4", 1", |
Plug, Cord and Switch: | UL Listed |
Overall Dimensions: | 24" x |
Weight: | 12.5 Lbs. |
Accessories Included: | Oil Can, Side Handle, Cast Iron Clamp, Blow Mold Carrying Case |
Warning: The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO THIS PRODUCT, BUT MUST BE SUPPLIED BY THE OPERATOR.
The Operator
PLEASE REMEMBER:
Do not operate the product if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment/reflexes might be impaired.
Do not wear loose clothing or jewelry as they can be caught in moving parts.
Protective gloves and
Wear restrictive hair covering to contain long hair.
Use eye and ear protection. Always wear ANSI approved impact safety goggles.
Maintain proper footing and balance at all times.
Do not abuse the power cord. Do not yank on cord to disconnect it from outlet. Keep the cord away from heat, oil and sharp edges.
Avoid unintentional starting. Do not carry any tool with your finger on the trigger.
REV 12/05
SKU 41876 | For technical questions, please call | Page 2 |
