Harbor Freight Tools 44849 manual To Attach The Charged Battery To The Drill, See Figure C

4.The red light on the Charger turns on when you insert the Battery into the Battery Charger, indicating that the electric current is charging the Battery. If the red light does not come on, recheck the Transformer cord connection or try a different electrical outlet.

The red light will shut off when the Battery is fully charged, and then the green light will turn back on automatically.

5.The Battery (11) will charge in approximately 1 to 1-1/2 hours. Do not charge the Bat- tery for longer than 2 hours. Subsequent charges will also take between 1 and 1-1/2 hours. Allow charger to cool down before charging another battery.

To Attach The Charged Battery To The Drill:

1.When the Battery (11) is fully charged, remove the Battery from the Battery Charger.

SECURING CLASP

	BATTERY
BATTERY	RECEPTACLE	FIGURE C

2.Insert the Battery into the Battery Receptacle located at the bottom of the Drill. Make sure the two Securing Clasps (one on each side of the Battery) engage the Drill.

(See Figure C.)

Rev 03a; 05j

SKU 44849 For technical questions, please call 1-800-444-3353. Page 6