ASSEMBLY INSTRUCTIONS
ALL PARTS BELOW REFER TO THE PARTS SHOWN ON PAGE 6.
Note: To insure safe assembly of this product, two people should assemble the Car Canopy.
1.Connect the assorted Tubes and Swaged Tubes (parts #2, 3, 4, 5, 6, 7),
FIGURE A
2.The eight Turnbuckles (part #11) are used to strengthen the frame assembly. Attach the Turnbuckles to the frame assembly and tighten, using a pair of pliers. NOTE: Do not over tighten the Turnbuckles, as bending to the frame assembly will occur. (See Figure B.)
FIGURE B
SKU 45211 | PAGE 4 |
