Harbor Freight Tools 45211 manual Figure C, INSPECTION, MAINTENANCE, and Cleaning

3.Drape the Tarp (part #14) over the assembled frame and secure the corners of the Tarp onto the frame, by inserting the Tarp Ties (part #10) through the metal eyelets of the Tarp and around the framing Tubes as shown in Figures C and D.

4.Once the corners are fastened, attach the remaining Ball Bungies through the rest of the metal eyelets and onto the framing Tubes.

FIGURE C

FIGURE D

Tarp Ties (#10)

Caution: The Car Canopy must be firmly secured on a flat, level and solid surface.

5.Lift one side of the roof and insert three Vertical Tubes (part #1) into the 3-Way End Pieces (part #8) and 4-Way End Piece (part #9). When complete, do the same to the other side. (See Figure C)

6.Insert a Metal Base (part #12, not shown) onto the bottom of each Vertical Tube (part #1).

7.Secure the Metal Bases (part #12) to the ground, using the T-Stakes (part #13, not shown).

INSPECTION, MAINTENANCE, AND CLEANING

1.Before each use, examine the general condition of the Canopy. Inspect the Canopy for damage. Check for loose parts, misalignment, broken parts, tears in the tarp,

SKU 45211 PAGE 5