17.Grip the Polisher/Waxer firmly with both hands. Then turn the Power Switch (part #13) to its “ON” position and allow the Pad (part #26) to rotate to its fullest speed. (See Figure D.)
18.Begin polishing the vehicle by lightly buffing off the wax residue in a circular pattern. Continue polishing until all the wax residue is removed.
19.After the wax has been removed from the vehicle’s surface, turn the Power Switch (part #13) to its “OFF” position. Then unplug the Power Cord (part #14) from the electrical extension cord, and unplug the extension cord from the grounded, 120 volt, electrical outlet. (See Figure D.)
20.Remove the Polishing Bonnet (part #29) from the Pad (part #26). With the Polishing Bonnet in your hand, remove the wax from all hard to reach areas of the vehicle such as around lights, door handles, under bumpers, etc.
(See Figure D.)
INSPECTION, MAINTENANCE, AND CLEANING
1.
WARNING! Make sure the Power Switch (part #13) of the Polisher/Waxer is in its “OFF” position and that the tool is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
2.BEFORE EACH USE, inspect the general condition of the Waxer/Polisher. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem cor- rected before further use.
Do not use damaged equipment.
3.The most common error when waxing/polishing a vehicle is applying too much wax. If the Pad (part #26) becomes saturated with wax, polishing will be more difficult and will take longer. Applying too much wax may also reduce the life of the Pad. If the Waxing Bonnet (part #28) continually comes off the Pad during use, too much wax may have been applied.
4.Remove the Waxing/Polishing Bonnets (part #28, #29) from the Pad (part #26) when the Waxer/Polisher is not in use. This will allow the Pad to dry and retain its original shape.
5.To prolong Pad (part #26) life and shape, store the Waxer/Polisher with the Pad face up.
SKU 45813 | PAGE 12 |
