| Specifications |
|
|
Welding Protection Types | For All Arc Welding Processes; |
| NOT for Laser Welding or OxyacetyleneWelding/Cutting |
|
|
Shell Material | High Impact Resistant Plastic Polyamide Nylon |
|
|
Shell Colors | Black |
|
|
Shade Range | 9 to 13; Clear State: |
Infrared Protection |
|
|
|
Ultraviolet Protection | up to shade 14 all the time |
Viewing Area | 6.29 Square Inch |
|
|
Lens Switching Speed | 1/25,000 second |
|
|
Power Source | Solar Cells |
| (rechargeable battery included, no additional battery required) |
|
|
Weight | 1.05 Lbs. |
Power ON / OFF | Fully Automatic |
Operating Temperature | 23 to 131° F |
|
|
Storing Temperature |
|
|
|
ANSI Approved Lens |
|
|
|
| Save This Manual |
You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.Do not use the Welding Helmet if the lens is cracked, if the lens or sensors are dirty, or if the lens or front retaining frame is loose.
2.Keep work area clean. Cluttered areas invite injuries.
3.Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lit. Do not use
REV 06/05
SKU 46092 | For technical questions, please call | Page 2 |
