Harbor Freight Tools 46092 operating instructions Lens And Helmet Maintenance, Shade Guide Chart

LENS AND HELMET MAINTENANCE Figure 2

1.Replace the Front Lens Cover (1) if it is damaged (cracked, scratched, soiled or pitted).

a.Remove the Front Lens Cover (1) by gently pulling up the central part of the Lens -seeFigure 2, right.

b.Remove the protection film from both sides of the new Lens if it comes with the film on. Place the new Lens into the right position by bending it slightly, enough to fit in between the tabs at each side of the lens and putting the lens in place - see Figure 2.

c.Check and make sure that the Lens is securely installed.

2.Clean the Filter Lens with a clean lint-free tissue or cotton cloth.

3.Don’t immerse the lens in water or any other liquid. Never use abrasives, solvents or oil based cleaners.

4.Don’t remove the auto-darkening filter from the Auto-Darkening Welding Helmet. Never try to open the filter.

5.Storage temperature: -13 to 167° F.

Shade Guide Chart

SKU 46092 For technical questions, please call 1-800-444-3353. Page 8