6.CHECK FOR DAMAGED PARTS. Before using this product, carefully check that the Air Filter System will operate properly and perform its intended function. Check for damaged parts and any other conditions that may affect the operation of this machine. Replace or repair damaged or worn parts immediately.
7.REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only identical replacement parts. Only use accessories intended for use with this product. Approved accessories are available from Harbor Freight Tools.
8.MAINTAIN THIS PRODUCT WITH CARE. Keep this product clean and dry for better and safer performance.
9.MAINTENANCE: For your safety, service and maintenance should be performed regularly by a qualified technician.
10.USE THE RIGHT PRODUCT FOR THE RIGHT JOB. There are certain applica- tions for which this product was designed. Do not use small equipment to do the work of larger industrial equipment. Do not use this product for a purpose for which it was not intended.
11.WARNING: The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS
1.IF PLACING THE AIR FILTER SYSTEM ON A TABLE OR SHELF, MAKE SURE THE MACHINE IS PLACED SECURELY ON A FLAT, LEVEL, STURDY TABLE OR SHELF CAPABLE OF SUPPORTING THE WEIGHT OF THE MACHINE.
2.IF ATTACHING THE AIR FILTER SYSTEM TO A CEILING OR WALL, MAKE SURE THE MACHINE IS ATTACHED SECURELY TO CEILING JOISTS CAPABLE OF SUPPORTING THE WEIGHT OF THE MACHINE.
3.ALWAYS DISCONNECT THIS MACHINE FROM ITS ELECTRICAL SUPPLY SOURCE BEFORE PERFORMING ANY SERVICES OR MAINTENANCE. Make sure to turn off the Air Filter System prior to it being cleaned, replacing the Filter Net (part #1), etcetera.
4.GROUND THIS MACHINE. The electrical power cord for this product is equipped with a grounded,
SKU 46361 | PAGE 3 |
