22.Do not operate Spray Gun near open flames, pilot lights, heaters, or any other heat source. Make sure you have adequate ventilation. Most solvents and paints are extremely flammable, especially when sprayed. Never smoke cigarettes in the same room you are working in.
23.Read labels on cleaning solvents and paint coatings. Chlorinated solvents such as
24.Paints and solvents may be harmful or fatal if swallowed or inhaled. Always use a respirator when spraying. Avoid prolonged skin contact with solvents or paints as they will irritate skin. After contact, immediately wash off exposed area with hot, soapy water.
25.Check all Spray Gun Seals and Air Connection. Before use, make sure the
Lid (#23) is fully tightened to the Cup (#19). Make sure the air hose is securely fastened to the Gun Body (#13).
Note: Performance of the compressor (if powered by line voltage) may vary depending on variations in local line voltage. Extension cord usage may also affect tool perfor- mance.
Warning:The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be under- stood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Additionally, read all of the warnings and instructions provided in the instruction manual of the air compressor you will be using.
WARNING: This product contains or, when used, produces a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. (California Health & Safety Code § 25249.5, et seq.)
Unpacking
When unpacking, check to make sure the parts listed on page 8 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
REV 12/05
SKU 47016 | For technical questions, please call | Page 4 |
