Operation
Regulator Knob
Pump
Locknut
Round |
|
Jet Tip | Trigger |
|
Power Cord
Pump
Housing
Container
1.Before loading the Container (17) with material, check the viscosity of the material.
2.Dip the Viscosity Cup into the material, and time how long it takes for the material to completely run out of the cup (See FIGURE 1). The longer it takes, the higher the viscosity.
3.In general, most materials work adequately if the viscosity is
between 15 and 30 seconds. | FIGURE 1 |
4.If the viscosity is too high, you will have to thin the material to use it. Follow the material manufacturer’s instructions for thinning each material.
5.If you thinned materials, retest the viscosity.
Note: When using a material for the first time, it is recommended that you experiment on newspaper attached to a vertical surface, testing your spray patterns.
SKU 47274 | For technical questions, please call | Page 5 |
