b.the longer cord should be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children or tripped over.
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If any problem exists, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Operation
1.Place the Computer Controlled Battery Charger on a flat, smooth surface near an electrical outlet. Connect the AC Adapter Jack to the Battery Charger.
2.Insert 1 to 4, D, C, AA, AAA batteries (or any combination of these four types), or 1 to 2 9V batteries in the Battery Compartment.You can mix
3.CHARGING WITHOUT DISCHARGE for AAA, AA, C and D size batteries. The Battery Charger is equipped with a Microprocessor to control charging. Plug the AC Adapter into a correct
4.CHARGING WITH DISCHARGE for AAA, AA, C and D size batteries. Plug the AC Adapter into a correct household electric outlet and press the red Discharge Button within 30 seconds. The red LED will light up and flash to indicate the discharge mode has started. When the battery is discharged, the red lights will light up and stop flashing to indicate the “Quick Charge” mode. After the battery is charged, the red lights will go off and the green LED will light up and the “Trickle Charge” mode is on. The charged batteries are now ready for use.
5.When 9V batteries are placed in the Computer Controlled Battery Charger, one red LED (between the 9V battery compartments) will go on. After the proper charge time is reached (11.5 hr. by timer) the red LED will go off to indicate the charging is finished.
6.Unplug the Computer Controlled Battery Charger from the AC Adapter and the AC Adapter from the electrical outlet and remove all batteries when not in use.
SKU 47620 | For technical questions, please call | Page |
