SPECIAL FEATURE
Detection of a bad cell for AAA, AA, C and D size batteries only. Insert batteries in charging slots. DO NOT PRESS RED BUTTON. When the battery is placed in the charging slot, the “RED” LED will light up and the Battery Charger will detect the status of the battery at that moment. If the battery is NOT suitable for charging, the LED light will switch off and stop charging. Defective batteries are indicated if either:
a.the LED Indicator is OFF.
b.the LED Indicator is BLINKING.
TROUBLESHOOTING
Problem |
| Possible Solution |
The Charge Indicator Light(s) do not illuminate | 1. | 1. Make sure the AC Adapter is plugged |
|
| into a working 120 Volt, grounded, electrical |
|
| outlet, and the Adapter Jack is plugged |
|
| tightly into the Battery Charger. |
| 2. | 2. Disconnect the Adapter Jack from the |
|
| Battery Charger. Check to make sure each |
|
| battery is inserted properly into the Battery |
|
| Compartment. |
| 3. | The Battery is bad |
The Computer Controlled Battery Charger | This is normal and should not be cause for | |
and/or the batteries feel warm to the touch | concern. | |
SKU 47620 | For technical questions, please call | Page |
