|
| Specifications | |
ITEM |
| DESCRIPTION | |
|
|
|
|
|
|
|
|
Welding Protection Types |
| For MIGIC //MAG,FluxCored,TIG,TIC,Plasma/ / | |
| a |
| |
|
| Microplasma Arc |
|
|
|
|
|
Not Protected From |
| Laser welding and oxyhydrogen welding | |
|
|
|
|
Filter Standard |
| ANSI Z87.1 | |
|
|
|
|
Switch |
| On / Off to use power from internal batteries; | |
|
|
|
|
Construction |
| High impact resistant plastic polyamide nylon; | |
| Full Face; Retainer and ratchet headband | ||
|
| ||
Darkness Range |
| Shade Control: Clear state # 3; Dark: DIN 4, 9 ~ 13 | |
| adjustable | ||
|
| ||
Lens Protection |
| Ultraviolet and infrared | |
|
|
|
|
Lens Viewing Size |
| 3.5 (W) x 1.5 (H) inches | |
|
|
|
|
Lens Switching Speed |
| 1/1000 second (to dark); 1/2 second (to light) | |
|
|
|
|
Lens Shade |
| Green | |
|
|
|
|
Filter Overall Size |
| 4.75 (W) x | |
|
|
|
|
Power Source |
| Solar powered with two AAA backup batteries | |
|
|
|
|
Operating Temperature |
| 23° ~ 131° F; (- 5° ~ 55° C) | |
|
|
|
|
Weight |
| 1.15 lbs. | |
|
|
|
|
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to re- duce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.Do not attempt to use the Auto Darkening Welding Helmet if the Lens has been damaged in any way. Severe eye damage will occur.
2.Keep work area clean. Cluttered areas invite injuries.
3.Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically powered tools in the presence of flammable gases or liquids.
4.Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords.
5.Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.
6.Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was
SKU 47996 | Page 2 | REV 05/05 |
