Specifications
Capacity | Wire | ||
Sheet - 35 Gauge to .079” | |||
| |||
Gears | 3:1 Gear Ratio | ||
| 2 | Smooth Rollers | |
Includes | 1 | Wire Roller | |
| 2 | Pattern Rollers | |
Unpacking
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Set Up Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Assembly
1.Remove the protective plastic coverings from all items including the attached Rollers.
2.Connect the Operating Handle (1) to the Shaft Gear (10) with Bolt (11) and Washer (12), as shown on the cover.
3.Slide the Working Handle (2) between the Right and Left Screw Gears (4,5) into the hole on top of the unit.
Mounting
1.The Mill must be mounted before use. Choose a work surface that is flat, level, and capable of bearing the weight of the Mill and workpieces.
2.Operating Handle must be positioned to rotate freely.
3.Using the Base of the Mill as a template, mark with a pencil where the holes need to be drilled. Verify that installation surface has no hidden utility lines before drilling.
4.Drill holes in the work surface and mount the Mill firmly using appropriate hardware (not included).
SKU 4832 | For technical questions, please call | Page 4 |
