Table Support
1. | Loosen the Pivot Lever (51). |
|
| |
2. | Slide the Table Support (52) over the Column (8). | Table | Column (8) | |
3. | Tighten the Pivot Lever to secure | |||
Support (52) |
| |||
| the Table Support in place. |
|
|
Pivot
Lever (51)
SAFETY
Figure B: Installing Table Support
Headstock and Feed Handles
SETUP
1.Loosen the two Set Screws (9) on the right side of the Headstock (42) so they will stay clear while installing it.
2.With the help of an assistant, lift the Headstock above the Column (8), and gently slide it down the Column as far as it will go.
3.Tighten the two Set Screws to secure the Headstock in place.
4.Thread the Feed Handles (6) into the Feed Seat (7) and tighten them.
Headstock (42)
Set
Screws
(9)
Feed
Handle (6)
Feed
Seat (7)
Figure C: Installing Headstock and Feed Handles
OPERATION
MAINTENANCE
Item 60238 | For technical questions, please call | Page 7 |
