Harbor Freight Tools 65549 manual Important Safety Information, General Safety

Specifications

Air Pressure	120 PSI
Maximum Compression	2200 lbs.
Ram Travel	12.8"
Coil Spring Sizes Accepted	4" Dia. to 6.3" Dia.
Spring Length Accepted	5" Long to 18" Long
Shoes	Small Set (4" Springs)
	Large Set (6.3" Springs)

Unpacking

When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this document as soon as possible.

Assembly Precautions

1.Use only according to these instructions. Improper use can create hazards.

2.Wear ANSI-approved safety goggles and heavy-duty work gloves during use.

3.Keep work area clean and well lit.

4.Keep bystanders out of the area during use.

5.Do not use when tired or when under the influence of drugs or medication.

Important SAFETY

Information

In this manual, on the labeling, and all other information provided with this product:

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

danGER indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

WARNING indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

cautION, used with the safety alert symbol, indicates a hazardous

situation which, if not avoided, could result in minor or moderate injury.

notICE is used to address practices not related to personal

injury.

cautION, without the safety alert symbol, is used to address

practices not related to personal injury.

GENERAL SAFETY.

1.WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this equipment.

2.WARNING! Wear approved safety hand and eye protection (standard spectacles are not adequate).

3.WARNING! TRAPPING DANGER ─ Keep hands and fingers away from the spring and compressing Shoes when in use.

4.Keep the work area clean, uncluttered and ensure there is adequate lighting.

5.Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.

6.Remove ill-fitting clothes. Remove ties, watches, rings and other loose jewellery. Contain and/or tie back long hair.

7.Wear appropriate protective clothing.

8.Familiarize yourself with the applications, limitations and potential hazards of the Spring Compressor.

9.DO NOT force the spring compressor to achieve a task it was not designed to per- form.

10.DO NOT allow untrained persons to use the spring compressor.

SKU 65549 For technical questions, please call 1-800-444-3353. Page 3