5.If necessary, use Brush (6) to clean hair trim- mings from exposed Shaver cutting heads.
6.If necessary, slide old Foil from out of Foil Holder and rinse trimmings off Foil.
7.If Foil must be replaced, slide the new Foil into Foil Holder so that small hole in the center of the Foil slides over small tab in the middle of the Foil Holder cross bar. This will hold Foil in place.
8.Slide the Shaver housing into the Foil Holder until it snaps into place.
9.Slide the Cover onto Shaver head until ready to use.
10.Recharge if necessary.
REMOVING THE BATTERY
1.By law, the
2.Use a screwdriver to unscrew the Shaver head from the top of the housing.
3.Pry off the label from the housing bottom and unscrew bottom from housing.
4.Pry front panel off Power Switch and remove screw from front panel.
5.Slide battery holder out of housing. Remove and properly dispose of
4
3
2
8
1
Parts List & diagram
Part | Description | Qty. |
1 | Shaver | 1 |
2 | Foils | 2 |
3 | Foil Holder | 1 |
4 | Cover | 1 |
5 | Charger | 1 |
6 | Brush | 1 |
7 | Carrying Sleeve | 1 |
8 | Power Switch | 1 |
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts.
PLEASE READ THE FOLLOWING CAREFULLY
The manufacturer and/or distributor has provided the parts list and assembly diagram in this document as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.
6
7
Please note: Charger (5) is not shown.
SKU 66342 | For technical questions, please call | Page 3 |
