SKU 66351 For technical questions, please call 1-800-444-3353. Page 4
outlet
deVIce
cord
drip loop
6. Use Drip-Loop to prevent water from
accidentally entering the electrical
power outlet. Use only with a GFCI
outlet. see second paragraph in
“Power cord safety” section of
this manual.
use and care
When servicing use only identical 1.
replacement parts.
Do not use this Sewage Pump for 2.
any job except that for which it is
intended.
disconnect the sewage Pump from 3.
the power supply when not in use,
or before inspection and/or ser-
vice/storage.
Store Idle Sewage Pump Indoors 4.
when not in use out of reach of chil-
dren.
Maintain labels and nameplates on 5.
the appliance. These carry important
safety information. If unreadable or
missing, contact Harbor Freight Tools
for a replacement.
The warnings, precautions, and in-6.
structions discussed in this instruction
manual cannot cover all possible con-
ditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
saVe tHese InstructIons.sPecIFIcatIons
Electrical Information 120 V, 60 Hz, 10.5 AMPS
Gallons Per Minute 110
Pump Motor 1 HP, 3450 RPM
unPacKIng
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
set uP InstructIons
read the entIre ImPortant
saFety InstructIons
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
to
PreVent
serIous
Injury From accIdental
oPeratIon:
unplug the sewage Pump
from its electrical outlet
before assembling,
inspecting, making any
adjustments, or servicing.
note: For additional information regarding
the parts listed in the following pages,