Harbor Freight Tools 66838 Cleaning And Storing, Please Read The Following Carefully, Page

Models: 66838

1 4
Download 4 pages 41.3 Kb
Page 3
Image 3
CLEANING AND STORING

9.To loosen the brake cable, turn the Nut coun- terclockwise.

10.There may be a secondary brake cable ten- sion adjustment that will have to be made as well. Use a 2mm Hex Key (not included) to loosen the set screw near then end of the brake cable just above the Wheel. See Figure 5, below.

Wheel

Record Serial Number Here: Set Screw

Figure 5

11.Please note: You will need to hold the brake cable in tension by holding the cable end with pliers. Then, while the brake cable is in tension, loosen the set screw.

12.Once the set screw is loosened, slide the cable clamp toward the brake lever. Then retighten the set screw.

13.WARNING! If the brakes continue to loosen after making these adjustment, contact

an authorized service technician to make repairs.

14.Do NOT use Rolling Walker if Brakes do not function properly. Using the Rolling Walker while brakes are not functioning properly can lead to brake failure and possible personal injury and property damage.

CLEANING AND STORING

1.Clean Walker use a soft, damp cloth.

2.Remove Basket or Bag and fold Walker. To fold, pull on tie cord wrapped around Support Axle (42).

3.Store folded Walker in dry, secure area.

Record Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Some parts are listed and shown for illustra- tion purposes only, and are not available individually as replacement parts.

PLEASE READ THE FOLLOWING

CAREFULLY

The manufacturer and/or distributor has provided the parts list and assembly diagram in this document as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.

SKU 66838

For technical questions, please call 1-800-444-3353.

Page 3

Page 3
Image 3
Harbor Freight Tools 66838 Cleaning And Storing, Please Read The Following Carefully, Record Serial Number Here, Page