INSPECTION, MAINTENANCE, AND CLEANING
1.WARNING! Make sure the Dehydrator is unplugged from its electrical outlet and allowed to cool before performing any inspection, maintenance, or cleaning procedures.
2.BEFORE EACH USE, inspect the general condition of the Dehydrator. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use. Do not use damaged equipment.
3.After each use, wash the Top Lid (2) and the Food Trays (3) in hot, soapy water, taking care to rinse completely. Dry with a soft cloth.
4.Clean the outside of the Dehydrator with a clean, damp cloth. Never use abrasive cleaners; they will damage the unit. You may use a mild detergent. Never submerge the outer base, or any other part not mentioned in number 3 above, in water or any other liquid.
5.Remove residue. Then, wipe with a damp cloth. Allow it to dry completely before reusing. You must keep the Bottom (8) free from any foreign objects or the Dehy- drator will not operate properly.
Note: Improper cooking may cause unpleasant odors while using the Dehydrator.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATESTHAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 66906 | For technical questions, please call | Page 8 |
