Harbor Freight Tools 67024 Presence of flammable liquids, Do not overreach. Keep proper

	the presence of flammable liquids,			tool on. A wrench or a key left at-
	gases or dust. Power tools create			tached to a rotating part of the power
	sparks which may ignite the dust or			tool may result in personal injury.
	fumes.		e. Do not overreach. Keep proper
	c. Keep children and bystanders			footing and balance at all times.
	away while operating a power			This enables better control of the
	tool. Distractions can cause you to			power tool in unexpected situations.
	lose control.		f.	Dress properly. Do not wear
2.	Electrical safety			loose clothing or jewelry. Keep
				your hair, clothing and gloves
	Do not expose power tools to rain
				away from moving parts. Loose
	or wet conditions. Water entering			clothes, jewelry or long hair can be
	a power tool will increase the risk of			caught in moving parts.
	electric shock.		g. Only use safety equipment that
3.	Personal safety			has been approved by an appro-
	a. Stay alert, watch what you are			priate standards agency. Unap-
				proved safety equipment may not
	doing and use common sense
				provide adequate protection. Eye
	when operating a power tool. Do
				protection must be ANSI-approved
	not use a power tool while you
				and breathing protection must be
	are tired or under the influence of
				NIOSH-approved for the specific
	drugs, alcohol or medication. A
				hazards in the work area.
	moment of inattention while operat-
	ing power tools may result in serious 4.			Power tool use and care
	personal injury.		a. Do not force the power tool. Use
	b. Use personal protective equip-
				the correct power tool for your
	ment. Always wear eye protec-			application. The correct power tool
	tion. Safety equipment such as dust			will do the job better and safer at the
	mask, non-skid safety shoes, hard			rate for which it was designed.
	hat, or hearing protection used for		b. Do not use the power tool if the
	appropriate conditions will reduce
				switch does not turn it on and off.
	personal injuries.
				Any power tool that cannot be con-
	c. Prevent unintentional starting.
				trolled with the switch is dangerous
	Ensure the switch is in the off-			and must be repaired.
	position before connecting to		c. Disconnect the plug from the
	power source and/or battery pack,
				power source and/or the battery
	picking up or carrying the tool.
				pack from the power tool before
	Carrying power tools with your finger
				making any adjustments, chang-
	on the switch or energizing power
				ing accessories, or storing power
	tools that have the switch on invites
				tools. Such preventive safety mea-
	accidents.
				sures reduce the risk of starting the
	d. Remove any adjusting key or
				power tool accidentally.
	wrench before turning the power
SKU 67024		For technical questions, please call 1-800-444-3353.			Page 3