Harbor Freight Tools 67024 operating instructions

Models: 67024

1 12
Download 12 pages 52.08 Kb
Page 5
Image 5

7.The battery charger gets hot during use. The charger’s heat can build up to unsafe levels and

create a fire hazard if it does not receive adequate ventilation, due to an electrical fault, or if it is used in a hot environment.

Do not place the charger on a flam- mable surface. Do not obstruct any vents on the charger. Especially avoid placing the charger on car- pets and rugs; they are not only flammable, but they also obstruct vents under the charger.

Place the charger on a stable, solid, nonflammable surface (such as a stable metal workbench or concrete floor) at least 1 foot away from all flammable objects, such as drapes or walls. Keep a fire extinguisher and a smoke detector in the area. Fre- quently monitor the charger and battery while charging.

8.This product is not a toy. Keep it out of reach of children.

9.People with pacemakers should consult their physician(s) before use.

Electromagnetic fields in close prox- imity to heart pacemaker could cause pacemaker interference or pacemak- er failure. In addition, people with pacemakers should:

Avoid operating alone.

Do not use with power switch locked on.

Properly maintain and inspect to avoid electrical shock.

10.WARNING: Some dust created by power sanding, sawing, grinding, drill- ing, and other construction activities, contains chemicals known [to the State of California] to cause cancer,

birth defects or other reproductive harm. Some examples of these chemicals are:

Lead from lead-based paints

Crystalline silica from bricks and ce- ment or other masonry products

Arsenic and chromium from chemi- cally treated lumber

Your risk from these exposures var- ies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code § 25249.5, et seq.)

11.The warnings, precautions, and in- structions discussed in this instruction manual cannot cover all possible con- ditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

12.Please refer to the complete safety warnings and instructions detailed in the instruction manual for the 67029 Charger, which is included with this Drill, before charging.

SKU 67024

For technical questions, please call 1-800-444-3353.

Page 5

Page 5
Image 5
Harbor Freight Tools 67024 operating instructions