Troubleshooting
Problem |
| Possible Causes |
| Likely Solutions |
Tool will not start. | 1. | Discharged Battery. | 1. | Charge the Battery. |
| 2. | Internal damage or wear. | 2. | Have technician service tool. |
Sander does not | 1. | Sand paper too fine. | 1. | Use a more coarse sand paper. |
remove residue from | 2. | Using wrong tool for the job at | 2. | Do not continue sanding to avoid |
the workpiece, even |
| hand. |
| damaging workpiece surface. Use |
after repeated brief |
|
|
| another method to remove residue. |
attempts. |
|
|
|
|
Excessive noise or | Internal damage or wear. (Carbon | Have technician service tool. | ||
rattling. | brushes or bearings, for example.) |
|
| |
Overheating | Forcing tool to work too hard. | Allow tool to work at its own rate. | ||
Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service.
SKU 67046 | For technical questions, please call | Page 10 |
