SpecificationsFunctions
Battery Type | 18V NiCd - SKU 67029 | |
|
| |
Charger | SKU 67031 | |
|
| |
OPM | ||
|
| |
Accessories | 1 each - 80, 100, 120 grit sand | |
paper | ||
|
Unpacking
When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at
Instructions for putting into use
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
To prevent serious injury
from accidental operation:
Turn the Power Switch of the tool to its “OFF” position and disconnect the tool from its battery pack before assembling or making any adjustments to the tool.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Lock Button
Power Switch (13)
|
|
|
|
|
|
|
|
|
| Battery Pack | |
Mounting | Pad (10) | (SKU 67029) | |
| Figure 1 | (Sold Separately) | |
Operating Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Work Piece and Work Area Set Up
1.Designate a work area that is clean and
2.Secure loose work pieces using a vise or clamps (not included) to pre- vent movement while working.
3.There must not be objects, such as utility lines, nearby that will present a hazard while working.
SKU 67046 | For technical questions, please call | Page 7 |
