67144 – 1/4 Ton
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Top Hook
WARNING! Verify that the load weighs less than the capacity of your Hoist model, as listed in the Specifications chart. Attachment point must be rated to support the combined weight of hoist and load.
1.Attach the Hoist to the connection point by sliding the Top Hook onto it.
The Top Hook must fit the connection point securely, with the safety latch fully engaged, as shown in Figure A, on the right.
safety latch
Selector
Lever
Lever
Handle
safety latch
Load Hook
Figure B: 67144 Controls
Figure A: Incorrect and
Correct Hook Attachment
2.Turn the Selector Lever to the neutral position (see Figure C) to disengage the ratchet.
Selector
Lever
Figure C: 67144 Selector Lever
Neutral Position
3.Pull the load chain by hand and attach the Load Hook to the load.
The safety latch should be fully engaged.
Do not suspend a load on just the end of the hook, see Figure A.
Page 4 | For technical questions, please call | Lever Chain Hoist |
