Page 4 For technical questions, please call 1-800-444-3353. SKU 67698
non-skid safety shoes, hard hat, or
hearing protection used for appropriate
conditions will reduce personal injuries.
Compressor Pump use and care3.
disconnect the plug of the a.
compressor from the power source
before making any adjustments,
changing accessories, or storing the
compressor pump. Such preventive
safety measures reduce the risk of
starting the unit accidentally.
store an idle compressor pump b.
out of the reach of children and
do not allow persons unfamiliar
with the compressor pump or
these instructions to operate it. A
compressor pump is dangerous in the
hands of untrained users.
maintain the compressor pump. c.
keep the compressor pump clean
for better and safer performance.
Follow instructions for lubricating
and changing accessories. keep
the outside surfaces dry, clean and
free from oil and grease. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
compressor’s operation. if damaged,
have the compressor repaired before
use. Many accidents are caused by a
poorly maintained compressor pump.
use the compressor pump in d.
accordance with these instructions,
taking into account the working
conditions and the work to be
performed. Use of the compressor
pump for operations different from those
intended could result in a hazardous
situation.
service4.
Have your compressor pump a.
serviced by a qualied repair person
using only identical replacement
parts. This will ensure that the safety of
the compressor pump is maintained.
Compressor Pump safety warnings
Wear ANSI-approved safety goggles 1.
during use.
Install pulley and belt safety guard before 2.
use.
Before rst and every use, verify 3.
Pump has sufcient oil.
The use of accessories or attachments 4.
not recommended by the manufacturer
may result in a risk of injury to persons.
misalignment between motor and 5.
Pump can damage the belt wheel.
Use a straight edge, such as a yardstick,
to check and adjust alignment as
needed.
use proper size motor and motor 6.
pulley. This air compressor Pump must
be installed with a 5 HP electric motor
and pulley (both not supplied) which can
turn the Air Compressor Belt Wheel at
approximately 1050 rpm.
install motor, pulley belt and pulley 7.
belt cover securely. Be sure to use the
proper size bolts to install your motor
(not included). The belt and belt cover
(not included) must be strong enough to
prevent breaking and possible injury.
be sure all equipment is rated to the 8.
appropriate capacity of this pump.
Make sure that the lowest rated piece
of equipment you are using can handle
the maximum pressure of the Air
Compressor Pump (see Specications).
do not direct the air outlet at any 9.
person or animal.