Manual Start
SAFETY | 1. To start a cold engine, move the Choke to the | |
CHOKE position. | ||
| ||
| To restart a warm engine, leave the Choke in the | |
| RUN position. | |
|
|
2. Open the Fuel Valve.
SETUP
1
CHOKE RUN
2
OPERATION
MAINTENANCE
3.Slide the Throttle or Speed Control Lever to 1/3 away from the SLOW position (the “turtle”).
Note: Some tools have a Speed Control Lever located elsewhere on the tool which functions the same as the
Throttle. Use the Speed Control Lever in place of the Throttle3 when the tool is so equipped.
| O | ON | |
| I | ||
OFF | ON | ||
| |||
4. Turn the Engine Switch on. | 4 |
|
5. Grip the Starter Handle of the Engine loosely and pull |
|
it slowly several times to allow the gasoline to flow into |
|
the Engine’s carburetor. Then pull the Starter Handle |
|
gently until resistance is felt. Allow Cable to retract fully | 5 |
and then pull it quickly. Repeat until the engine starts. |
Note: Do not let the Starter Handle snap back against the engine.
Hold it as it recoils so it doesn't hit the engine.
Page 10 | For technical questions, please call | Horizontal Engines |