Specifications

Charger Input

120 V~ / 60 Hz

 

 

Charging Time

3-5 Hours

 

 

Speed

0-3000 SPM (Strokes Per Minute)

 

 

Blades

6” x 6 TPI (Wood Blade)

6” x 18 TPI (Metal Blade)

 

Battery Type

18V, NiCd; 1300 mAh

Save This Manual

Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial

number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

Important Safety Information

In this manual, on the labeling, and all other information provided with this product:

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE is used to address practices not related to personal injury.

CAUTION, without the safety alert symbol, is used to address practices not related to personal injury.

General Power Tool

Safety Warnings

WARNING Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/ or serious injury.

Save all warnings and instructions for future reference.

The term ″power tool″ in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1.Work area safety

a.Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c.Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2.Electrical safety

a.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

3.Personal safety

a.Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are

tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b.Use personal protective equipment.

Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c.Prevent unintentional starting. Ensure the switch is in the off‑position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.

d.Remove any adjusting key or wrench before turning the power tool on. A wrench

REV 11a

Page 2

For technical questions, please call 1-800-444-3353.

SKU 68240

Page 2
Image 2
Harbor Freight Tools 68240 manual Save This Manual, General Power Tool Safety Warnings, Specifications, Sku