Page 3
For Pump technical questions, please call 1-800-444-3353.Item 68375
For Engine technical questions, please call 1-800-520-0882.
23. Before use, check for misalignment or binding
of moving parts, breakage of parts, and any
other condition that may affect the equipment’s
operation. If damaged, have the equipment
serviced before using. Many accidents are
caused by poorly maintained equipment.
24. Use the correct equipment for the application.
Do not modify the equipment and do not use the
equipment for a purpose for which it is not intended.

Service Precautions

1. before service, maintenance, or cleaning:
a. Turn the engine switch to its “OFF” position.
b. Allow the engine to completely cool.
c. Then, remove the spark plug
cap from the spark plug.
2. Keep all safety guards in place and in
proper working order. Safety guards include
mufer,aircleaner,mechanicalguards,and
heat shields, among other guards.
3. Do not alter or adjust any part of the equipment
or its engine that is sealed by the manufacturer
or distributor. Only a qualied service
technician may adjust parts that may increase
or decrease governed engine speed.
4. Wear ANSI-approved safety goggles, heavy-duty work
gloves, and dust mask/respirator during service.
5. Maintain labels and nameplates on the equipment.
These carry important information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
6. Havetheequipmentservicedbyaqualiedrepair
person using only identical replacement parts.
This will ensure that the safety of the equipment
is maintained. Do not attempt any service or
maintenance procedures not explained in this
manual or any procedures that you are uncertain
about your ability to perform safely or correctly.
7. Store equipment out of the reach of children.
Refueling:
1. Donotsmoke,orallowsparks,ames,
or other sources of ignition around the
equipment, especially when refuelling.
2. Donotrellthefueltankwhilethe
engine is running or hot.
3. Donotllfueltanktothetop.Leavealittle
room for the fuel to expand as needed.
4. Refuel in a well-ventilated area only.
5. Wipe up any spilled fuel and allow excess to evaporate
before starting engine. To prevent FIRE, do not start
the engine while the smell of fuel hangs in the air.
SAVE THESE INSTRUCTIONS.