Operating Instructions

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

Inspect tool before use, looking for damaged, loose, and missing parts.

If any problems are found, do not use tool until repaired.

Adjust the Spring Tension

1.

Pull out approximately six feet of Hose.

3.

Run the hose back through the guide

2.

Remove the Hose Stopper from the

 

and re-attach the hose stopper.

 

 

 

Hose and slide the Hose out of the Roller

4.

Pull the Hose out several feet to check the tension.

 

Guide so the Hose is hanging loose.

 

 

a.To increase tension, wrap the loose hose one time around the Reel Drum.

b.To decrease tension, unwrap the hose one time from the drum.

General Operating Instructions

Safety

Setup

1.Check the Wheel operation by slowly pulling the Hose out. You should hear a clicking noise.

2.To lock the Hose, pull it out a minimum of 1/2 revolution and it will stay locked after the first, second, or third click.

3.To unlock, slowly pull until the clicking stops, and let it retract until the Hose Stopper hits the Hose Guide.

CAUTION: Hold on to the Hose while it is rewinding, to avoid damage to the Hose Reel.

4.Attach a coupler (sold separately) to your air compressor hose and apply thread seal tape to the Inlet fitting on the Reel. Connect the coupler to the Inlet fitting.

5.Connect your air tool to the other end of the Hose using another coupler and thread seal tape.

6.Follow all instructions from the air tool and compressor for set up and use.

7.When finished using the Hose, disconnect the air tool and retract the hose. Wipe the Hose Reel clean with a dry cloth.

Operation

Maintenance

Item 69234

For technical questions, please call 1-800-444-3353.

Page 5

Page 4 Page 6
Page 5
Image 5
Harbor Freight Tools 69234 Adjust the Spring Tension, General Operating Instructions, Safety Setup, Operation Maintenance
Page 4 Page 6

69234 specifications

Harbor Freight Tools 69234 is a versatile and essential workhorse designed for both professional tradespeople and DIY enthusiasts. This tool stands out in its category due to a combination of practical features, robust technology, and user-focused characteristics, making it a reliable choice for a variety of tasks.

One of the standout features of the Harbor Freight Tools 69234 is its impressive power output. Equipped with a high-performance motor, it delivers exceptional torque and speed, enabling users to tackle a wide range of applications with ease. This makes it ideal for cutting, drilling, and grinding tasks, ensuring that even the toughest materials can be handled effortlessly.

The tool boasts an ergonomic design, which is crucial for prolonged use. The comfortable grip minimizes hand fatigue, allowing users to work for extended periods without discomfort. Moreover, its lightweight construction ensures that it can be maneuvered with ease, making it suitable for both overhead and intricate work.

Another key characteristic of the Harbor Freight Tools 69234 is its versatility. It comes with a variety of attachments and accessories, allowing users to customize their tool for specific tasks. Whether you need to sand, polish, or cut, this tool can adapt to your needs, enhancing productivity and efficiency on the jobsite or at home.

Safety features are paramount in any power tool, and the Harbor Freight Tools 69234 does not disappoint. It includes an integrated safety switch to prevent accidental activation, as well as protective guards to shield users from debris and potential hazards while operating. This attention to user safety underscores the brand’s commitment to quality and reliability.

The durability of the Harbor Freight Tools 69234 cannot be overlooked. Built with high-quality materials, this tool is designed to withstand the rigors of daily use. Whether you’re a seasoned professional or a weekend warrior, this tool offers longevity that ensures you won’t need frequent replacements.

In summary, Harbor Freight Tools 69234 is a robust, versatile, and user-friendly tool that meets the demands of both professionals and hobbyists alike. With its powerful motor, ergonomic design, comprehensive safety features, and durable construction, it is an investment that promises value and efficiency for a multitude of tasks. This tool is not just a gadget; it’s an essential addition to any workshop or toolbox.
Top Page Image Contents