Harbor Freight Tools 69297 owner manual Pipe Connection, Specifications, Set up

Specifications

Power Requirements	120V~ 60Hz 5A
Discharge/Intake	1 IN. NPT
Maximum Flow	650 GPH
Maximum Delivery Height	98 FT.
Suction Lift	20 FT.
Pressure	43 PSI
Cord Length	6 FT.

Set up

To prevent electric shock and death from incorrect usage follow these instructions:

This is NOT a submersible pump. Do not immerse in water.

Pipe Connection

The Pump uses 1" NPT piping (sold separately). Purchase the necessary length of pipe, including any needed fittings and bends. Mount the Pump as close to the source of water as possible and within the range of the rated Suction Lift. The connections must be airtight. Wrap all threaded connections with PTFE tape (sold separately).

Priming Plug Outlet

Inlet

1.Remove the Inlet and Outlet Covers from the Pump.

2.Attach the water source to the Inlet, using appropriate methods. The Inlet hose or pipe must be collapse- proof to properly withstand the suction force.

3.Install a foot valve (sold separately) at the bottom of the inlet.

4.Attach the outlet connection to the Outlet. A Y-fitting with dual valves (sold separately) is helpful for priming the pump (see next section).

	Pump
Figure 1	Housing

Page 4 For technical questions, please call 1-800-444-3353. SKU 69297