Harbor Freight Tools 90003 operating instructions Figure F

To Attach The Eye Shield Mounting Rods:

1.Insert one Screw (part #48) with a Washer (part #13) through a Bracket

(part #36) and the Left Eye Shield Mounting Rod (part #49). Then, firmly tighten the Screw to secure the Left Eye Shield Mounting Rod to the body of the Bench Grinder. (See Figure F.)

2.Repeat Step #1 to attach the Right Eye Shield Mounting Rod (part #33) to the body of the Bench Grinder. (See Figure F.)

BRACKET (#36) BRACKET (#36)

LEFT EYE

SHIELD

MOUNTING

ROD (#49)

WASHER (#13) WASHER (#13)

SCREW (#48) SCREW (#48)

RIGHT EYE

SHIELD

MOUNTING

ROD (#33)

FIGURE F

To Attach The Eye Shields:

1.Loosen the Screw (part #55) on the Pressure Plate (part #50). Slide the Pres- sure Plate onto the Left Eye Shield Mounting Rod (part #49). Then, re-tighten the Screw so that the Eye Shield (part #26) can be moved up or down but will be tight enough to stay in place. (See Figure G, next page.)

2.Repeat Step #1 to attach the remaining Eye Shield to the Right Eye Shield Mounting Rod (part #33). (See Figure G.)

To Mount The Bench Grinder On A Workbench:

1. WARNING! Make sure the workbench (not included) to which the Bench Grinder will be mounted is flat, level, and sturdy enough to bear the weight of the

Bench Grinder and other tools and materials being used.

SKU 90003 PAGE 12