Harbor Freight Tools 9018 manual Specifications, Save This Manual, Safety Warnings and Precautions

Models: 9018

1 6
Download 6 pages 24.81 Kb
Page 2
Image 2
Specifications

Specifications

Table Dimensions

28” Dia. x 20-1/4” H

Chair Dimensions (2)

12” X 14” X 24” H

Umbrella Dimensions

46” Dia. x 30-1/2” L (opened)

Umbrella Stand

2-1/8” W x 5-5/8” L

Chair Sitting Area

9-1/4” W x 12” L

Materials: Hard Wood, Carbon Steel Frames, Gray Paint,

Waterproof Umbrella Material

CHAIR CAPACITY: 220 LBS. / TABLE CAPACITY: 175 LBS.

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using this product, basic safety precautions should always be fol- lowed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1.Keep work area clean. Cluttered areas invite injuries.

2.Observe work area conditions. Don’t expose to rain unless the wood is properly treated. Keep work area well lighted.

3.Keep children away. Children must never be allowed in the work area during assembly.

4.Store idle equipment. When not in use, the Patio Set must be stored in a dry location to inhibit rust and wear.

5.Use the right tool for the job. Do not attempt to force a small Patio Set to do the work of a larger Patio Set. There are certain applications for which this Patio Set was designed. It will do the job better and more safely if you do not modify this

Patio Set and do not use this Patio Set for a purpose for which it was not intended.

6.Dress properly. Do not wear loose clothing or jewelry during assembly. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair.

7.Use eye protection. Always wear ANSI approved impact safety goggles during assembly

8.Do not overreach. Keep proper footing and balance at all times.

SKU 09018

Page 2

 

Page 2
Image 2
Harbor Freight Tools 9018 manual Specifications, Save This Manual, Safety Warnings and Precautions