Assembly (continued)
4. Connect the Umbrella (#8) and the |
| |
FIGURE 4 | ||
Pole (#12) using Screw (#7). Slide the | ||
Pole (#12) into the Umbrella Stand (#9). |
| |
See FIGURE 4. | Umbrella (#8) |
Screw (#7)
Pole (#12)
Umbrella Stand (#9)
5.Attach the Chair Board (#4)
to the Chair Stand (#3)
using four sets ofFIGURE 5 Screws (#6).
| Chair |
| Board |
| (#4) |
Note: Remember to set |
|
the Patio Set up on a |
|
flat, dry, level surface. Do |
|
not deploy the Umbrella (#8) | Chair Stand (#3) |
during windy conditions. |
|
Maintenance
1.Periodically check the hardware and tighten if necessary.
2.If you leave the set outdoors during inclement weather, it is recommended that you seal the set with a marine quality varnish or paint.
SKU 09018 | Page 5 |
|