8. Use eye and breathing protection. Always wear ANSI approved safety impact
eye goggles and dust masks or a respirator when working with this product.
9. Always turn off the Planer and unplug the unit from its electrical outlet
before performing any maintenance, or changing accessories.
10. Never leave the Planer unattended when it is plugged into an electrical
outlet. Make sure to unplug it from its electrical outlet before leaving the area.
11. Do not allow children to handle or play with this product.
12. Store idle equipment. When not in use, tools and equipment should be stored
in a dry location to inhibit rust. Always lock up tools and equipment, and keep out
of reach of children.
13. Do not use this product if under the influence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgement or reflexes are
impaired while taking drugs. If there is any doubt, do not attempt to use this
product.
14. Industrial applications must follow OSHA requirements.
15. Maintain this product with care. Keep this product clean and dry for better and
safer performance. Also, make sure to keep the Blades sharp.
16. Maintenance: For your safety, service and maintenance should be performed
regularly by a qualified technician.
17. Check for damaged parts. Before using this product, carefully check that it will
operate properly and perform its intended function. Check for damaged parts
and any other conditions that may affect the operation of this product. Replace
or repair damaged or worn parts immediately.
18. Do not use the Planer if it has been dropped, damaged, left outdoors, or
immersed in liquid.
19. To avoid electrical shock, do not handle the Power Cord Plug or Planer with
wet hands.
20. Keep all guards in place and in working order.
21. Remove all adjusting wrenches from the Planer before turning it on.
22. Allow the Blades to spin up to full speed before feeding them into the
workpiece. When turning off the Planer, allow the Blades to spin down and stop
SKU 91062 PAGE 9