Harbor Freight Tools 91092 operating instructions Unpacking

Models: 91092

1 6
Download 6 pages 46.48 Kb
Page 3
Image 3

7.Stay alert. Watch what you are doing, use common sense during assembly, and use of this chair.

8.Use eye and ear protection. Always wear ANSI approved impact safety goggles during assembly.

9.Take caution as some woods contain preservatives such as copper chromium arsenate (CCA) which can be toxic. When handling these materials extra care should be taken to avoid inhalation and minimize skin contact.

10.Check for damaged parts. Before using this chair, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Any part that is damaged should be properly repaired or replaced.

11.Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty.

12.Do not assemble this chair if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not proceed with assembly.

13.Maintenance. For your safety, service and maintenance should be performed regularly. Check the alignment of all parts, and check the tightness of all fasteners.

Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Unpacking

When unpacking, check to make sure the following parts are included.

1

Back

1

Back Brace

1

Seat

10 Wood Screws

2

Front Legs

10 55mm Bolts with nut and washer

2

Back Supports

2

65mm Bolts with nut and washer

2

Arms

1

Owner’s Manual

2 Rockers

2

50mm Bolt with Nut and washer

 

 

4

80mm Bolt with nut and washer

If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual, or contact your local Harbor Freight retailer.

SKU 90849

Page 3

SKU 91092

 

Page 3
Image 3
Harbor Freight Tools 91092 operating instructions Unpacking