Assembly Drawing
C1
B
I | Step 1 |
F | Attach the front end of B to C1 & C2 |
| with 6 bolts, washers and nuts (I). |
D | D |
F L
Step 2
Attach F (right and left) with C1 and C2. using 4 bolts, washers and nuts (I). Attach D (right and left) to B (seat, back end) and F using 4 bolts, washers and nuts (L).
G
A
Step 3
Connecting G with the back of A, using 2 bolts, washers & nuts (K).
C2 |
C1 |
Step 5
Attach E1 and E2 to D, using 2 bolts, washers and nuts (J). Attach E1 to C1 with screws (H). Repeat with E2 to C2 with (H).
Step 4
Attach A with D & G, using 4 screws (H). Attach A with B, using 2 screws (H).
Completed. Make sure all screws, nuts and bolts are tightened and in place. Before using, test the Rocker by rocking it back and forth and being sure it is safe to operate.
SKU 90849 | Page 4 |
SKU 91092 |
|
