PERSONAL SAFETY

grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the product should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user.

5.Double insulated products are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,

contact a qualified electrician to install a polarized outlet. Do not change the

plug in any way. Double insulation TOOL USE AND CARE eliminates the need for the three wire grounded power cord and grounded power supply system.

6.Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.

7.Do not expose this product to rain or wet conditions. Water entering an electric product will increase the risk of electric shock.

8.Do not abuse the Power Cord. Never use the Power Cord to carry the product or pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp edges, or moving parts. Replace damaged Power Cords immediately. Damaged Power Cords increase the risk of electric shock.

PERSONAL SAFETY

9.Stay alert. Watch what you are doing, and use common sense when operating a power product. Do not use a power product while tired or under the influence of drugs, alcohol, or medication.

10.Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

11.Avoid accidental starting. Be sure the Power Switch is off before plugging in.

12.Use safety equipment. Always wear eye protection. During installation and maintenance use non-skid safety shoes and ANSI approved safety goggles.

TOOL USE AND CARE

13.Use the correct product for your application. The correct product will do the job better and safer at the rate for which it is designed.

14.Do not use the power product if the Power Switch does not turn it on or off. Any product that cannot be controlled with the Power Switch is dangerous and must be replaced.

15.Disconnect the Power Cord Plug from the power source before storing the system.

SKU 91393

PAGE 3

Page 3
Image 3
Harbor Freight Tools 91393 manual Personal Safety, Tool Use And Care