![FIGURE F](/images/new-backgrounds/89748/8974827x1.webp)
5.Turn the Engine Power Switch (2) to its “ON” position. (See Figure F.)
ENGINE POWER SWITCH
(2)
ON
OFF
FIGURE F
6.Hold the Start Handle (41A) loosely and pull it slowly several times to allow the gasoline to flow into the Engine’s carburetor. Then hold the Start Handle firmly and pull the rope hard and fast. Pull the rope all the way out, using two hands if necessary. If necessary pull the rope several times until the Engine starts.
(See Figure G.)
7.Allow the Engine to run for several seconds. Then, open the Choke Lever (21A) all the way. (See Figure E.)
120 VOLT
DUAL
OUTLETS
(6)
START
HANDLE
(41A)
FIGURE G
SKU 91523 | PAGE 14 |